Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1995ACCENT L4-1.5L SOHC ALPHA ENGINEREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINE
1995 Hyundai Accent L4-1.5L SOHC Alpha Engine
Connecting Rod, Engine
1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Connecting Rod, Engine
Crankshaft, inch:
Standard Journal Diameter:
Main Bearing 1.9685
Crank Pin 1.7717
Out Of Round, All 0.0004
Taper, All 0.0004
Bearing Clearance, inch:
Connecting Rod Bearings 0.0009-0.0016
Thrust Bearing Clearance 0.0020-0.0070
Connecting Rods Side Clearance, inch 0.0039-0.0098
Standard Journal Diameter:
Main Bearing 1.9685
Crank Pin 1.7717
Out Of Round, All 0.0004
Taper, All 0.0004
Bearing Clearance, inch:
Connecting Rod Bearings 0.0009-0.0016
Thrust Bearing Clearance 0.0020-0.0070
Connecting Rods Side Clearance, inch 0.0039-0.0098
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.