Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1995ACCENT L4-1.5L SOHC ALPHA ENGINEREPAIR AND DIAGNOSISSPECIFICATIONSELECTRICAL SPECIFICATIONSIGNITION CABLE
1995 Hyundai Accent L4-1.5L SOHC Alpha Engine
Ignition Cable
1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Ignition Cable
Resistance:
Cable No. 1 4.8 K Ohms
Cable No. 2 10.0 K Ohms
Cable No. 3 7.3 K Ohms
Cable No. 4 12.0 K Ohms
Resistance should not be higher than 10.0 K Ohms per foot of cable. If resistance is higher, replace the cable.
Cable No. 1 4.8 K Ohms
Cable No. 2 10.0 K Ohms
Cable No. 3 7.3 K Ohms
Cable No. 4 12.0 K Ohms
Resistance should not be higher than 10.0 K Ohms per foot of cable. If resistance is higher, replace the cable.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.