Air Bag Control Module: Service and Repair

1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Service and Repair
Refer to Technician Safety Information for air bag arming and disarming before preceding with following procedures.

1. Disconnect battery ground cable.

Fig. 2 Front Console Side Covers & Air Bag Connector Removal:





2. Remove center console side covers, Fig. 2.
3. Disconnect air bag control module harness first before removing mounting bolts.
4. Remove mounting bolts and control module.





5. Reverse procedure to install. Install control module with arrow facing front of vehicle, Fig. 3.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.