Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1995ACCENT L4-1.5L SOHC ALPHA ENGINEREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTTECHNICAL SERVICE BULLETINS
1995 Hyundai Accent L4-1.5L SOHC Alpha Engine
Powertrain Management: Technical Service Bulletins
1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Technical Service Bulletins
- Recalls
- Customer Interest
- T/P and MAF Sensor - Poor Idle/Poor Driveability
- A/T - Driveability Concerns
- A/T - Harsh 4-3 Downshift When Decelerating
- A/T - Shift Lever Will Not Shift Out Of Park
- A/T - Shift Shock at Low Speeds and On Downshifts
- A/T - Harsh Shifts, DTCs P0717/P0722 Set
- A/T - Shift Quality Problems
- A/T - Shift Shock/Shift Delays
- A/T - Will Not Engage Overdrive
- A/T - Reverse To Drive Engagement Shock
- A/T - Harsh Engagement Shock
- Exhaust System - Excessive Sulfur Odors
- A/T - Harsh Shifts/DTC P1709/P0732/P0733/P0734
- A/T - MIL ON/Shift Flare/Harsh Engagement/DTC's Set
- A/T - Intermittent Delayed, Erratic, Harsh Shifting
- A/T - Delayed/Harsh/Erratic Upshifts/Downshifts
- By Symptom
- Abnormal wear/deterioration
- Customer Interest
- T/P and MAF Sensor - Poor Idle/Poor Driveability
- A/T - Driveability Concerns
- A/T - Harsh 4-3 Downshift When Decelerating
- A/T - Shift Lever Will Not Shift Out Of Park
- A/T - Shift Shock at Low Speeds and On Downshifts
- A/T - Harsh Shifts, DTCs P0717/P0722 Set
- A/T - Shift Quality Problems
- A/T - Shift Shock/Shift Delays
- A/T - Will Not Engage Overdrive
- A/T - Reverse To Drive Engagement Shock
- A/T - Harsh Engagement Shock
- Exhaust System - Excessive Sulfur Odors
- A/T - Harsh Shifts/DTC P1709/P0732/P0733/P0734
- A/T - MIL ON/Shift Flare/Harsh Engagement/DTC's Set
- A/T - Intermittent Delayed, Erratic, Harsh Shifting
- A/T - Delayed/Harsh/Erratic Upshifts/Downshifts
- Driveability
- Erratic Operation
- Erratic Shifting
- Hard Shifting
- A/T - Harsh 4-3 Downshift When Decelerating
- A/T - Shift Shock at Low Speeds and On Downshifts
- A/T - Reverse To Drive Engagement Shock
- A/T - Harsh Engagement Shock
- A/T - Harsh Shifts/DTC P1709/P0732/P0733/P0734
- A/T - MIL ON/Shift Flare/Harsh Engagement/DTC's Set
- A/T - Driveability Concerns/DTC's Set/MIL ON
- A/T - Intermittent Delayed, Erratic, Harsh Shifting
- A/T - Delayed/Harsh/Erratic Upshifts/Downshifts
- Hunting-Surging
- No shift/Incorrect gear engagement
- Odors
- Out of specification
- Poor performance
- Recalls
- Slipping
- Starting problems
- Won't disengage
- All Technical Service Bulletins
- Engine Controls - ECM Replacement and Testing Procedures
- T/P and MAF Sensor - Poor Idle/Poor Driveability
- A/T - Driveability Concerns
- A/T - Harsh 4-3 Downshift When Decelerating
- Spark Plugs - Application/Service Interval
- A/C Compressor - Operation
- Engine/Cooling/Fuel System - New Parts
- A/T - Shift Lever Will Not Shift Out Of Park
- Campaign - ECM Wiring Harness Rerouting
- Scan Tool - Software Update Procedure
- Engine Coolant Temperature Sensor - Diagnosis
- Campaign - ECM Wiring Harness Rerouting Re-Issue
- Engine Fault Code - Diagnostic Manual Correction
- Engine Fault Code - Diagnostic Manual Update
- Engine Controls - O2 Sensor Connector Guidelines
- Exhaust System - Rotten Egg Odor Explanantion
- Exhaust System - Sulfur Odor Explanation
- Accelerator Pedal Assembly - Manual Revision
- A/T - Shift Shock at Low Speeds and On Downshifts
- A/T - Harsh Shifts, DTCs P0717/P0722 Set
- A/T - Fluid Temperature Sensor Diagnosis
- A/T - Shift Quality Problems
- A/T - Shift Shock/Shift Delays
- A/T - Will Not Engage Overdrive
- A/T - Cold Acceleration in 2ND Gear
- A/T - Reverse To Drive Engagement Shock
- A/T - Harsh Engagement Shock
- TCM - Adaptive Control
- Vehicle Identification Number - Decoder
- Vehicle Identifiication Number - Decoder
- Exhaust System - Excessive Sulfur Odors
- Vehicle - Diagnostic System Technical Support
- Diagnostic Scanner - Parts Replacement Numbers
- OBD II - Diagnostic Trouble Codes
- HDS Scan Tool - Part Numbers.
- HDS Cable Connector - Cover End Replacement
- HDS Scan Tool - Loaner Program
- Scan Tool Software - Update Information
- Engine Performance - Misfire Code Diagnosis
- Recall 95V043000: Blown Fuse Causes Engine Stalling
- HDS Scan Tool - Part Numbers
- Diagnostic System Adapter Cables - Ordering
- A/T - Harsh Shifts/DTC P1709/P0732/P0733/P0734
- A/T - MIL ON/Shift Flare/Harsh Engagement/DTC's Set
- A/T - Driveability Concerns/DTC's Set/MIL ON
- A/T - Intermittent Delayed, Erratic, Harsh Shifting
- A/T - Delayed/Harsh/Erratic Upshifts/Downshifts
- A/T - Tester Sets Diagnostic Trouble Codes
- VIN - Identification Decoder
- Fuel System - E85 Fuel Usage Recommendations
- Fuel System - Fuel Quality Testing
- Fuel System - Hyundai Fuel System Cleaner
- Fuel System - Fuel Consumption Evaluation Procedure
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.