Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1995ACCENT L4-1.5L SOHC ALPHA ENGINEREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSENGINE CONTROLS - ECM REPLACEMENT AND TESTING PROCEDURES
1995 Hyundai Accent L4-1.5L SOHC Alpha Engine
Engine Controls - ECM Replacement and Testing Procedures
1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Engine Controls - ECM Replacement and Testing Procedures
NUMBER
11-BE-013
GROUP
ELECTRICAL
MODEL(S)
All
SUBJECT
ENGINE CONTROL UNIT (ECU) REPLACEMENT
AND TESTING PROCEDURE
Description:
This bulletin describes the following procedure for vehicles equipped with Blue Link:
^ How to swap ECU for diagnosis only.
^ How to replace ECU.
^ How to clear Diagnostic code(s) from the Blue Link system.
Applicable Vehicles:
- All vehicles equipped with Blue Link
Warranty Information:
11-BE-013
GROUP
ELECTRICAL
MODEL(S)
All
SUBJECT
ENGINE CONTROL UNIT (ECU) REPLACEMENT
AND TESTING PROCEDURE
Description:
This bulletin describes the following procedure for vehicles equipped with Blue Link:
^ How to swap ECU for diagnosis only.
^ How to replace ECU.
^ How to clear Diagnostic code(s) from the Blue Link system.
Applicable Vehicles:
- All vehicles equipped with Blue Link
Warranty Information:
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.