Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1995ACCENT L4-1.5L SOHC ALPHA ENGINEREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSMALFUNCTION INDICATOR LAMPTESTING AND INSPECTION
1995 Hyundai Accent L4-1.5L SOHC Alpha Engine
Malfunction Indicator Lamp: Testing and Inspection
1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Testing and Inspection
1. After turning ON the ignition key, check that the malfunction indicator lamp illuminates for about 5 seconds and then goes out.
2. If the lamp does not illuminate, check for open circuit in harness, blown fuse and blown bulb.
2. If the lamp does not illuminate, check for open circuit in harness, blown fuse and blown bulb.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.