Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI1995ACCENT L4-1.5L SOHC ALPHA ENGINEREPAIR AND DIAGNOSISCRUISE CONTROLTESTING AND INSPECTIONSYSTEM OPERATIONCHECKING AUTOMATIC SPEED CONTROL MAIN SWITCH
1995 Hyundai Accent L4-1.5L SOHC Alpha Engine
Checking Automatic Speed Control Main Switch
1995 Hyundai Accent L4-1.5L SOHC Alpha EngineSECTION Checking Automatic Speed Control Main Switch
1. Turn ignition switch to ON position.
2. Turning on main switch, ensure indicator lamp comes on.
3. Drive vehicle at a speed between 25-85 mph, then press Set button and check for the following:
a. Ensure alarm sounds when switch is pressed.
b. Ensure vehicle speed remains constant when switch is released.
c. If vehicle speed decreases to approximately 12 mph below set speed, the speed control will be cancelled.
2. Turning on main switch, ensure indicator lamp comes on.
3. Drive vehicle at a speed between 25-85 mph, then press Set button and check for the following:
a. Ensure alarm sounds when switch is pressed.
b. Ensure vehicle speed remains constant when switch is released.
c. If vehicle speed decreases to approximately 12 mph below set speed, the speed control will be cancelled.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.