Steering System

2011 Honda CR-V EX, 2.4 RE4, BZHASECTION Steering System
STEERING SPECIFICATION

Item Measurement Qualification Standard or New Service Limit
Steering wheel Rotational play measured at outside edge   0-10 mm (0-0.39 in) -
Initial turning load measured at outside edge with engine running   34 N (3.5 kgf, 7.7 lbf) -
Gearbox Angle of rack guide screw loosened from locked position ('07-09 models)   10±5°
Angle of rack guide screw loosened from locked position ('10 model)   15±5°
Pump Output pressure with shut-off valve closed   7, 355-8, 041 kPa (75-82 kgf/cm2 , 1, 067-1, 166 psi) -
Power steering fluid Capacity: use Honda power steering fluid System capacity 0.99 L (1.05 US qt) -
Reservoir capacity 0.29 L (0.31 US qt) -
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.