Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE4, BZHAREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSCLIMATE CONTROLCLIMATE CONTROL UNIT REMOVAL/INSTALLATION
2011 Honda CR-V EX, 2.4 RE4, BZHA
Climate Control Unit Removal/Installation
2011 Honda CR-V EX, 2.4 RE4, BZHASECTION Climate Control Unit Removal/Installation
- Move the shift lever to position 1.
- Place protective tape (A) on both sides of the dashboard next to the climate control unit.
- Insert a flat-tip screwdriver in the groove on each side, then pull straight out on both screwdriver shaft.NOTE: Do not pry with the flat-tip screwdrivers.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.