Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE4, BZHAREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMINTAKE AIR SYSTEMINTAKE AIR RESONATOR REMOVAL/INSTALLATION

2011 Honda CR-V EX, 2.4 RE4, BZHA

Intake Air Resonator Removal/Installation

2011 Honda CR-V EX, 2.4 RE4, BZHASECTION Intake Air Resonator Removal/Installation

Remove the air cleaner (see THROTTLE BODY CLEANING ).
Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Remove the intake air resonator (A).

Fig 1: Intake Air Resonator With Torque Specification
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.