Enable Conditions

2011 Honda CR-V EX, 2.4 RE4, BZHASECTION Enable Conditions
ENABLE CONDITIONS

Condition Minimum Maximum
Elapsed time after starting the engine 15 seconds -
Engine coolant temperature 156 °F (69 °C) -
Intake air temperature 19 °F (-7 °C) -
MAP value - 79 kPa (23.6 inHg, 600 mmHg)
Battery voltage 10.5 V -
Fuel trim 0.69 1.47
Fuel feedback Closed loop
No active DTCs set (prevents monitor from running) P0010, P0011, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0171, P0172, P0222, P0223, P0300, P0301, P0302, P0303, P0304, P0335, P0339, P0341, P0351, P0352, P0353, P0354, P0443, P0496, P0497, P060A, P1009, P1109, P1128, P1129, P145C, P1659, P2101, P2118, P2122, P2123, P2127, P2128, P2135, P2138, P2176, P2227, P2228, P2229, P2646, P2647, P2648, P2649
Other At idle
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.