Design Specifications

2011 Honda CR-V EX, 2.4 RE4, BZHASECTION Design Specifications
ITEM SPECIFICATION

Item Measurement Qualification Specification
DIMENSIONS Overall length '07-09 models 4, 518 mm (177.9 in)
'10 model 4, 550-4, 555 mm (179.1 -179.3 in)
Overall width   1, 820 mm (71.6 in)
Overall height   1, 680 mm (66.1 in)
Wheel base   2, 620 mm (103.1 in)
Track Front 1, 565 mm (61.6 in)
Rear 1, 565 mm (61.6 in)
Seating capacity   Five (5)
WEIGHT Gross Vehicle Weight Rating (GVWR)   2, 070 kg (4, 564 lbs)
ENGINE Type   Water cooled, 4-stroke DOHC 1-VTEC gasoline engine
Cylinder arrangement   Inline 4-cylinder, transverse
Bore and stroke   87 x 99 mm (3.43 x 3.90 in)
Displacement   2, 354 cm3 (144 cu in)
Compression ratio K24Z1 9.7
K24Z6 10.5
Valve train   Chain drive, DOHC i-VTEC 4 valves per cylinder
Lubrication system   Forced, wet sump, with trochoid pump
Fuel required   Regular UNLEADED gasoline with 87 Pump Octane Number or higher
STARTER Type   Gear reduction
Nominal output   1.6 kW
Nominal voltage   12V
Hour rating   30 seconds
Direction of rotation   Counterclockwise as viewed from drive end
AUTOMATIC TRANSMISSION Type   Electronically-controlled automatic, five-speed forward, one reverse, three-element torque converter with lock-up clutch
Primary reduction   Direct 1:1
Gear ratio 1st 2.786
2nd 1.614
3rd 1 082
4th 0.773
5th 0.566
Reverse 2 000
Transfer gear Type Single helical gear
Gear ratio 0.875
Differential final gears Type Single helical gear
Gear ratio 4.500
STEERING Type   Hydraulic power-assisted rack and pinion
Overall ratio   13.73
Turns, lock-to-lock   2.67
Steering wheel diameter   380 mm (14.9 in)
SUSPENSION Type Front Independent strut with stabilizer, coil spring
Rear Independent double wishbone with stabilizer, coil spring
Shock absorber Front and rear Telescopic, hydraulic, nitrogen gas-filled
TIRES Size Front and rear 225/65R17 102T
Spare T155/90R17 101M
WHEEL ALIGNMENT Camber Front 0°00'
Rear -1°00'
Caster Front 3°02'
Total toe-in Front 0 mm (0 in)
Rear 2 mm (0.08 in)
Front wheel turning angle Inward 38°12'
Outward (reference) 31°44'
BRAKES Type of service brake Front Power-assisted self-adjusting ventilated disc
Rear Power-assisted self-adjusting solid disc
Type of parking brake   Mechanical actuating, rear wheels
Pad friction surface area (swept area) Front 60.5 cm2 (9.38 sq in) x 2
Rear 27.9 cm2 (4.32 sq in) x 2
Parking brake shoe friction surface area Rear 57.0 cm2 (8 84 sq in) x 2
AIR CONDITIONING Compressor Type Scroll
Capacity 97.9 mL (5.97 cu in)/rev
Maximum speed 10, 000 rpm
Lubricant capacity 80 mL (2 2/3 fl.oz)
Lubricant type SP-10
Condenser Type Corrugated fin
Evaporator Type Corrugated fin
Blower Type Stabilized swirling flow
Motor type 260 W/12V
Speed control (Heating/Air conditioning) 5-speed
Speed control (Climate control) Infinitely variable
Maximum capacity 465 m3 (16.424 cu ft)/h
Temperature control   Air-mix type
Compressor clutch Type Dry, single plate, poly-V belt drive
Electrical power consumption at 68°F (20°C) 42 W maximum, at 12V
Refrigerant Type HFC-134a(R-134a)
Capacity 440-490 g (15.5-17.3 oz)
ELECTRICAL RATINGS Battery 2WD 12 V-47 Ah/20 HR (12 V-38 Ah/5 HR)
4WD 12 V-47 Ah/20 HR (12 V-36 Ah/5 HR)
Fuses Under-hood fuse/relay box 100 A, 80 A, 50 A, 40 A, 30 A, 20 A, 15 A, 10 A, 7.5 A
Under-dash fuse/relay box 30 A, 20 A, 15 A, 10 A, 7.5 A
Auxiliary Under-dash fuse holder 7.5A
Light bulbs Headlight high beam 12 V-55 W
Headlight low beam 12 V-50 W
Front side marker/parking light 12 V-3CP
Front turn signal lights 12 V-21 W Amber color
Rear turn signal lights 12 V-21 W Amber color
Brake/Taillights 12 V-21/5 W
Rear side marker light 12 V-5 W
High mount brake light 12 V-21 W
Back-up lights 12 V-21 W
License plate light 12 V-5 W
Ceiling lights 12 V-8 W
Individual map light 12 V-8 W
Cargo area light 12 V-8 W
Gauge lights 12 V-LED (non-replaceable)
Ambient light 12 V-LED
Vanity mirror light 12 V-2 W
Indicator lights 12 V-LED, 14 V-0.56 W, 0.84 W, 1.12 W
Washer reservoir Capacity (USA models) 2.5 L (2 64 US qt)
Capacity (Canada models) 4.5 L (4.75 US qt)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.