Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE3, MZJAREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMADVANCED DIAGNOSTICSDTC P1731: PROBLEM IN SHIFT CONTROL SYSTEMENABLE CONDITIONS
2011 Honda CR-V EX, 2.4 RE3, MZJA
Enable Conditions
2011 Honda CR-V EX, 2.4 RE3, MZJASECTION Enable Conditions
ENABLE CONDITIONS
| Condition | Minimum | Maximum | ||||
|---|---|---|---|---|---|---|
| ATF temperature | - | 248 °F (120 °C)(1) | ||||
| Vehicle speed | - | 6 mph (9 km/h)(1) | ||||
| Battery voltage | 11 V | - | ||||
| Throttle position | 6 %(2) | - | ||||
| Shift lever position | D | |||||
| Shift status | Neutral → 1st(1) | |||||
| 1st → 2nd(2) | ||||||
| No active DTCs set (prevents monitor from running) | P0122, P0123, P0705, P0706, P0716, P0717, P0718, P0721, P0722, P0723, P0747, P0752, P0756, P0757, P0761, P0771, P0776, P0777, P0796, P0797, P0962, P0963, P0966, P0967, P0970, P0971, P0973, P0974, P0976, P0977, P0979, P0980, P0982, P0983, P0985, P0986, P1730, P1732, P1733, P1734, P2122, P2123 | |||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.