Enable Conditions

2011 Honda CR-V EX, 2.4 RE3, MZJASECTION Enable Conditions
ENABLE CONDITIONS

Condition Minimum Maximum
Elapsed time after starting the engine 2.5 seconds -
Duration of quick warm-up system operation after engine start-up - 20 seconds
Engine coolant temperature 47 °F (8 °C) 140 °F (60 °C)
Throttle position Fully closed
No active DTCs set (prevents monitor from running) P0010, P0011, P0101, P0102, P0103, P0107, P0108, P0116, P0117, P0118, P0122, P0123, P0125, P0222, P0223, P0300, P0301, P0302, P0303, P0304, P0335, P0339, P0341, P0351, P0352, P0353, P0354, P0506, P0507, P060A, P1009, P1109, P1116, P1128, P1129, P1659, P2101, P2118, P2122, P2123, P2127, P2128, P2135, P2138, P2176, P2227, P2228, P2229, P2279, P2646, P2647, P2648, P2649
Other Vehicle stopped
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.