Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE3, MZJAREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMADVANCED DIAGNOSTICSDTC P0128: COOLING SYSTEM MALFUNCTIONENABLE CONDITIONS
2011 Honda CR-V EX, 2.4 RE3, MZJA
Enable Conditions
2011 Honda CR-V EX, 2.4 RE3, MZJASECTION Enable Conditions
ENABLE CONDITIONS
| Condition | Minimum | Maximum | ||||
|---|---|---|---|---|---|---|
| Engine off time | 6 hours | - | ||||
| Initial intake air temperature | 19 °F (-7 °C) | - | ||||
| Initial engine coolant temperature (ECT 1) | 19 °F (-7 °C) | 123 °F (50 °C) | ||||
| Initial engine coolant temperature (ECT 2) | 19 °F (-7 °C) | - | ||||
| The difference between initial intake air temperature and current intake air temperature | - | 3 °F (2 °C)(1) | ||||
| 7 °F (4 °C)(2) | ||||||
| No active DTCs set (prevents monitor from running) | P0010, P0011, P0101, P0102, P0103, P0107, P0108, P0111, P0112, P0113, P0116, P0117, P0118, P0122, P0123, P0125, P0134, P0135, P0171, P0172, P0222, P0223, P0300, P0301, P0302, P0303, P0304, P0335, P0339, P0340, P0341, P0344, P0351, P0352, P0353, P0354, P0443, P0496, P0497, P0506, P0507, P060A, P1009, P1109, P1116, P1128, P1129, P1157, P1172, P145C, P1659, P2101, P2118, P2122, P2123, P2127, P2128, P2135, P2138, P2176, P2183, P2184, P2185, P2195, P2227, P2228, P2229, P2238, P2252, P2279, P2610, P2646, P2647, P2648, P2649 | |||||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.