Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE3, MZJAREPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMADVANCED DIAGNOSTICSDTC P0101: MASS AIRFLOW (MAF) SENSOR CIRCUIT RANGE/PERFORMANCE PROBLEMENABLE CONDITIONS
2011 Honda CR-V EX, 2.4 RE3, MZJA
Enable Conditions
2011 Honda CR-V EX, 2.4 RE3, MZJASECTION Enable Conditions
ENABLE CONDITIONS
| Condition | Minimum | Maximum |
|---|---|---|
| Elapsed time after starting the engine | 3 seconds | - |
| Engine coolant temperature | 156 °F (69 °C) | - |
| Engine speed | 550 rpm | 6,800 rpm |
| No active DTCs set (prevents monitor from running) | P0102, P0103, P0107, P0108, P0112, P0113, P0117, P0118, P0171, P0172, P0300, P0301, P0302, P0303, P0304, P0335, P0339, P0341, P0351, P0352, P0353, P0354, P0443, P0496, P0497, P0506, P0507, P1128, P1129, P145C, P2279, P2646, P2647, P2648, P2649 | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.