Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE3, MZJAREPAIR AND DIAGNOSISENGINE PERFORMANCEIGNITION SYSTEMTORQUE SPECIFICATIONS - GENERALSTEERING
2011 Honda CR-V EX, 2.4 RE3, MZJA
Torque Specifications - General: Steering
2011 Honda CR-V EX, 2.4 RE3, MZJASECTION Steering
STEERING SPECIFICATIONS CHART
| Location | Item | Remark | Torque |
|---|---|---|---|
| Steering | Steering wheel bolt | 39 N.m (4.0 kgf.m, 29 lbf.ft) | |
| Steering joint bolt | 28 N.m (2.9 kgf.m, 21 lbf.ft) | ||
| Steering column bolts*1 | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Steering column nuts*1 | 13 N.m (1.3 kgf.m, 10 lbf.ft) | ||
| Steering pump bolts | 22 N.m (2.2 kgf.m, 16 lbf.ft) | ||
| Steering gearbox bolts*1 | 71 N.m (7.2 kgf.m, 52 lbf.ft) | ||
| Steering gearbox bracket bolts | 66 N.m (6.7 kgf.m, 49 lbf.ft) | ||
| Tie-rod end ball joint nut | 54 N.m (5.5 kgf.m, 40 lbf.ft) | ||
| Tie-rod end locknut | 44 N.m (4.5 kgf.m, 32 lbf.ft) | ||
| *1: Parts to be tightened in a particular order. *2: Follow the S/M procedures closely for torque, sequence, and special steps. |
|||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.