Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2011CR-V EX, 2.4 RE3, BZJAREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSAUTOMATIC TRANSMISSIONA/T INTERLOCK SYSTEMSHIFT LOCK STOP/SHIFT LOCK STOP CUSHION REPLACEMENT
2011 Honda CR-V EX, 2.4 RE3, BZJA
Shift Lock Stop/Shift Lock Stop Cushion Replacement
2011 Honda CR-V EX, 2.4 RE3, BZJASECTION Shift Lock Stop/Shift Lock Stop Cushion Replacement
NOTE:
Make sure not to get any silicone grease to the terminal part of the connectors and switches when applying silicone grease, if you have silicone grease on your hand or glove.
- Remove the shift lock solenoid (see SHIFT LOCK SOLENOID TEST ).
- Remove the shift lock stop (A) and the stop cushion (B), and replace the shift lock stop or stop cushion.
- Install the shift lock stop cushion on the shift lock stop.
- Apply silicone grease to the pin (C) on the shift lever bracket base, and install the shift lock stop over the pin. Keep the connector terminals free of silicone grease.
- Install the shift lock solenoid (see SHIFT LOCK SOLENOID TEST ).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.