Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2009ACCORD EX, 4D SEDAN, 3.5 CP3REPAIR AND DIAGNOSISENGINE PERFORMANCESYSTEMINTAKE AIR SYSTEM (V6)AIR CLEANER ELEMENT INSPECTION/REPLACEMENT
2009 Honda Accord EX, 4D Sedan, 3.5 CP3
Air Cleaner Element Inspection/Replacement
2009 Honda Accord EX, 4D Sedan, 3.5 CP3SECTION Air Cleaner Element Inspection/Replacement
- Open the air cleaner housing cover (A).
- Remove the air cleaner element (B) from the air cleaner housing (C).
- Check the air cleaner element for damage or clogging. If it is damaged or clogged, replace it.NOTE: Do not use compressed air to clean the air cleaner element.
- Clean and remove any debris from inside the air cleaner housing.
- Install the parts in the reverse order of removal.
- If you did not replace the air cleaner element, this procedure is complete.
- If the Maintenance Minder required air cleaner element replacement, reset the Maintenance Minder (see MAINTENANCE MAIN ITEMS ).
- If the idle speed fluctuates, do the idle speed inspection (see IDLE SPEED INSPECTION ).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.