Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2006PILOT LX, 3.5 YF1, J35A9REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMADVANCED DIAGNOSTICS
2006 Honda Pilot LX, 3.5 YF1, J35A9
Advanced Diagnostics
2006 Honda Pilot LX, 3.5 YF1, J35A9SECTION Advanced Diagnostics
- DTC P0107: Manifold Absolute Pressure (MAP) Sensor Circuit Low Voltage
- DTC P0108: Manifold Absolute Pressure (MAP) Sensor Circuit High Voltage
- DTC P0111: Intake Air Temperature (IAT) Sensor Circuit Range/Performance Problem
- DTC P0112: Intake Air Temperature (IAT) Sensor Circuit Low Voltage
- DTC P0113: Intake Air Temperature (IAT) Sensor Circuit High Voltage
- DTC P0116: Engine Coolant Temperature (ECT) Sensor 1 Range/Performance Problem
- DTC P0117: Engine Coolant Temperature (ECT) Sensor 1 Circuit Low Voltage
- DTC P0118: Engine Coolant Temperature (ECT) Sensor 1 Circuit High Voltage
- DTC P0122: Throttle Position (TP) Sensor A Circuit Low Voltage
- DTC P0123: Throttle Position (TP) Sensor A Circuit High Voltage
- DTC P0125: Engine Coolant Temperature (ECT) Sensor 1 Malfunction/Slow Response
- DTC P0128: Cooling System Malfunction
- DTC P0133: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) Circuit Slow Response
- DTC P0134: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) Heater System Malfunction
- DTC P0135: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) Heater Circuit Malfunction
- DTC P0137: Rear Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 1, Sensor 2) Circuit Low Voltage
- DTC P0138: Rear Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 1, Sensor 2)) Circuit High Voltage
- DTC P0139: Rear Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 1, Sensor 2)) Circuit Slow Response
- DTC P0141: Rear Secondary Heated Oxygen Sensor (Secondary HO2S) (Bank 1, Sensor 2) Heater Circuit Malfunction
- DTC P0153: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) Circuit Slow Response
- DTC P0154: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) Heater System Malfunction
- DTC P0155: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) Heater Circuit Malfunction
- DTC P0157: Front Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 2, Sensor 2)) Circuit Low Voltage
- DTC P0158: Front Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 2, Sensor 2)) Circuit High Voltage
- DTC P0159: Front Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 2, Sensor 2)) Circuit Slow Response
- DTC P0161: Front Secondary Heated Oxygen Sensor (Secondary HO2S) (Bank 2, Sensor 2) Heater Circuit Malfunction
- DTC P0171: Rear Bank (Bank 1) Fuel System Too Lean
- DTC P0172: Rear Bank (Bank 1) Fuel System Too Rich
- DTC P0174: Front Bank (Bank 2) Fuel System Too Lean
- DTC P0175: Front Bank (Bank 2) Fuel System Too Rich
- DTC P0222: Throttle Position (TP) Sensor B Circuit Low Voltage
- DTC P0223: Throttle Position (TP) Sensor B Circuit High Voltage
- DTC P0300: Random Misfire Detected (Engine Type: J35A9)
- DTC P0300: Random Misfire Detected (Engine Type: J35Z1)
- DTC P0301: No. 1 Cylinder Misfire Detected (Engine Type: J35A9); DTC P0302: No. 2 Cylinder Misfire Detected (Engine Type: J35A9); DTC P0303: No. 3 Cylinder Misfire Detected (Engine Type: J35A9); DTC P0304: No. 4 Cylinder Misfire Detected (Engine Type: J35A9); DTC P0305: No. 5 Cylinder Misfire Detected (Engine Type: J35A9); DTC P0306: No. 6 Cylinder Misfire Detected (Engine Type: J35A9)
- DTC P0301: No. 1 Cylinder Misfire Detected (Engine Type: J35Z1); DTC P0302: No. 2 Cylinder Misfire Detected (Engine Type: J35Z1); DTC P0303: No. 3 Cylinder Misfire Detected (Engine Type: J35Z1); DTC P0304: No. 4 Cylinder Misfire Detected (Engine Type: J35Z1); DTC P0305: No. 5 Cylinder Misfire Detected (Engine Type: J35Z1); DTC P0306: No. 6 Cylinder Misfire Detected (Engine Type: J35Z1)
- DTC P0325: Knock Sensor (KS) Circuit Malfunction
- DTC P0335: Crankshaft Position (CKP) Sensor A No Signal
- DTC P0339: Crankshaft Position (CKP) Sensor A Intermittent Interruption
- DTC P0340: Camshaft Position (CMP) Sensor No Signal
- DTC P0344: Camshaft Position (CMP) Sensor Intermittent Interruption
- DTC P0385: Crankshaft Position (CKP) Sensor B No Signal
- DTC P0389: Crankshaft Position (CKP) Sensor B Intermittent Interruption
- DTC P0401: Exhaust Gas Recirculation (EGR) Insufficient Flow
- DTC P0404: Exhaust Gas Recirculation (EGR) Control Circuit Range/Performance Problem
- DTC P0406: Exhaust Gas Recirculation (EGR) Valve Position Sensor Circuit High Voltage
- DTC P0420: Rear Bank Catalyst System Efficiency Below Threshold (Bank 1)
- DTC P0430: Front Bank Catalyst System Efficiency Below Threshold (Bank 2)
- DTC P0443: Evaporative Emission (EVAP) Canister Purge Valve Circuit Malfunction
- DTC P0451: Fuel Tank Pressure (FTP) Sensor Circuit Range/Performance Problem
- DTC P0452: Fuel Tank Pressure (FTP) Sensor Circuit Low Voltage
- DTC P0453: Fuel Tank Pressure (FTP) Sensor Circuit High Voltage
- DTC P0455: Evaporative Emission (EVAP) System Very Large Leak Detected
- DTC P0456: Evaporative Emission (EVAP) System Very Small Leak Detected
- DTC P0457: Evaporative Emission (EVAP) System Leak Detected/Fuel Fill Cap Loose or Missing
- DTC P0461: Fuel Level Sensor (Fuel Gauge Sending Unit) Circuit Range/Performance Problem
- DTC P0462: Fuel Level Sensor (Fuel Gauge Sending Unit) Circuit Low Voltage
- DTC P0463: Fuel Level Sensor (Fuel Gauge Sending Unit) Circuit High Voltage
- DTC P0496: Evaporative Emission (EVAP) System High Purge Flow
- DTC P0497: Evaporative Emission (EVAP) System Low Purge Flow
- DTC P0498: Evaporative Emission (EVAP) Canister Vent Shut Valve Control Circuit Low Voltage
- DTC P0499: Evaporative Emission (EVAP) Canister Vent Shut Valve Control Circuit High Voltage
- DTC P0506: Idle Control System RPM Lower Than Expected
- DTC P0507: Idle Control System RPM Higher Than Expected
- DTC P0522: Engine Oil Pressure (EOP) Sensor Circuit Low Voltage (Engine Type: J35Z1)
- DTC P0523: Engine Oil Pressure (EOP) Sensor Circuit High Voltage (Engine Type: J35Z1)
- DTC P0562: Charging System Low Voltage
- DTC P0563: Powertrain Control Module (PCM) Power Source Circuit Unexpected Voltage
- DTC P0602: Powertrain Control Module (PCM) Programming Error
- DTC P0603: Powertrain Control Module (PCM) Internal Circuit Malfunction (Keep Alive Memory (KAM) Error)
- DTC P0607: Lost Communication with Electronic Throttle Control System (ETCS)
- DTC P061F: Electronic Throttle Control System (ETCS) Malfunction
- DTC P0630: VIN Not Programmed or Mismatch
- DTC P0641: Sensor Reference Voltage A Circuit Malfunction
- DTC P0685: Powertrain Control Module (PCM) Power Control Circuit/Internal Circuit Malfunction
- DTC P0705: Short in Transmission Range Switch Circuit (Multiple Shift-position Input)
- DTC P0706: Open in Transmission Range Switch Circuit
- DTC P0711: Problem in ATF Temperature Sensor Circuit
- DTC P0712: Short in ATF Temperature Sensor Circuit
- DTC P0713: Open in ATF Temperature Sensor Circuit
- DTC P0716: Problem in Input Shaft (Mainshaft) Speed Sensor Circuit
- DTC P0717: Problem in Input Shaft (Mainshaft) Speed Sensor Circuit (No Signal Input)
- DTC P0718: Input Shaft (Mainshaft) Speed Sensor Intermittent Failure
- DTC P0721: Problem in Output Shaft (Countershaft) Speed Sensor Circuit
- DTC P0722: Problem in Output Shaft (Countershaft) Speed Sensor Circuit (No Signal Input)
- DTC P0723: Output Shaft (Countershaft) Speed Sensor Intermittent Failure
- DTC P0731: Problem in 1st Clutch and 1st Clutch Hydraulic Circuit
- DTC P0732: Problem in 2nd Clutch and 2nd Clutch Hydraulic Circuit
- DTC P0733: Problem in 3rd Clutch and 3rd Clutch Hydraulic Circuit
- DTC P0734: Problem in 4th Clutch and 4th Clutch Hydraulic Circuit
- DTC P0735: Problem in 5th Clutch and 5th Clutch Hydraulic Circuit
- DTC P0741: Torque Converter Clutch Hydraulic Circuit Stuck OFF
- DTC P0746: A/T Clutch Pressure Control Solenoid Valve A Stuck OFF
- DTC P0747: A/T Clutch Pressure Control Solenoid Valve A Stuck ON
- DTC P0751: Shift Solenoid Valve A Stuck OFF
- DTC P0752: Shift Solenoid Valve A Stuck ON
- DTC P0756: Shift Solenoid Valve B Stuck OFF
- DTC P0757: Shift Solenoid Valve B Stuck ON
- DTC P0761: Shift Solenoid Valve C Stuck OFF
- DTC P0762: Shift Solenoid Valve C Stuck ON
- DTC P0776: A/T Clutch Pressure Control Solenoid Valve B Stuck OFF
- DTC P0777: A/T Clutch Pressure Control Solenoid Valve B Stuck ON
- DTC P0780: Problem in Shift Control System
- DTC P0847: Short in 3rd Clutch Transmission Fluid Pressure Switch Circuit, or 3rd Clutch Transmission Fluid Pressure Switch Stuck ON
- DTC P0848: Open in 3rd Clutch Transmission Fluid Pressure Switch Circuit, or 3rd Clutch Transmission Fluid Pressure Switch Stuck OFF
- DTC P0872: Short in 4th Clutch Transmission Fluid Pressure Switch Circuit, or 4th Clutch Transmission Fluid Pressure Switch Stuck ON
- DTC P0873: Open in 4th Clutch Transmission Fluid Pressure Switch Circuit, or 4th Clutch Transmission Fluid Pressure Switch Stuck OFF
- DTC P0962: Problem in A/T Clutch Pressure Control Solenoid Valve A Circuit
- DTC P0963: Problem in A/T Clutch Pressure Control Solenoid Valve A
- DTC P0966: Problem in A/T Clutch Pressure Control Solenoid Valve B Circuit
- DTC P0967: Problem in A/T Clutch Pressure Control Solenoid Valve B
- DTC P0970: Problem in A/T Clutch Pressure Control Solenoid Valve C Circuit
- DTC P0971: Problem in A/T Clutch Pressure Control Solenoid Valve C
- DTC P0973: Short in Shift Solenoid Valve A Circuit
- DTC P0974: Open in Shift Solenoid Valve A Circuit
- DTC P0976: Short in Shift Solenoid Valve B Circuit
- DTC P0977: Open in Shift Solenoid Valve B Circuit
- DTC P0979: Short in Shift Solenoid Valve C Circuit
- DTC P0980: Open in Shift Solenoid Valve C Circuit
- DTC P0A14: Front Engine Mount Actuator Circuit Malfunction (Engine Type: J35Z1)
- DTC P0A15: Front Engine Mount Actuator Control Circuit Low Current (Engine Type: J35Z1)
- DTC P0A16: Front Active Control Engine Mount Actuator Control Circuit High Electric Current (Engine Type: J35Z1)
- DTC P0AB6: Rear Engine Mount Actuator Circuit Malfunction (Engine Type: J35Z1)
- DTC P0AB7: Rear Engine Mount Actuator Control Circuit Low Current (Engine Type: J35Z1)
- DTC P0AB8: Rear Engine Mount Actuator Control Circuit High Current (Engine Type: J35Z1)
- DTC P1077: Intake Manifold Tuning (IMT) Valve Stuck in High RPM Position (Engine Type: J35Z1)
- DTC P1078: Intake Manifold Tuning (IMT) Valve Stuck in Low RPM Position (Engine Type: J35Z1)
- DTC P1109: Barometric Pressure (BARO) Sensor Circuit Out of Range-High
- DTC P1116: Engine Coolant Temperature (ECT) Sensor 1 Performance Problem
- DTC P1128: Manifold Absolute Pressure (MAP) Sensor Signal Lower Than Expected
- DTC P1129: Manifold Absolute Pressure (MAP) Sensor Signal Higher Than Expected
- DTC P1172: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) Circuit Out of Range High
- DTC P1174: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) Circuit Out of Range High
- DTC P1297: Electrical Load Detector (ELD) Circuit Low Voltage
- DTC P1298: Electrical Load Detector (ELD) Circuit High Voltage
- DTC P1454: Fuel Tank Pressure (FTP) Sensor Circuit Range/Performance Problem
- DTC P1549: Charging System High Voltage
- DTC P15AB: Engine Mount Control Unit Power Source Circuit Low Voltage (Engine Type: J35Z1)
- DTC P15AC: Engine Mount Control Unit Internal Circuit Malfunction (Engine Type: J35Z1)
- DTC P15AD: Engine Mount Control Unit Internal Circuit Malfunction (Engine Type: J35Z1)
- DTC P15AE: Cylinder Pause Signal Malfunction (Engine Type: J35Z1)
- DTC P15AF: Camshaft Position (CMP) Sensor Signal Malfunction (Engine Type: J35Z1)
- DTC P15B0: Crankshaft Position (CKP) Sensor Signal Malfunction (Engine Type: J35Z1)
- DTC P15B1: Camshaft Position (CMP) Sensor/Crankshaft Position (CKP) Sensor Signal Incorrect (Engine Type: J35Z1)
- DTC P1658: Electronic Throttle Control System (ETCS) Control Relay ON Malfunction
- DTC P1659: Electronic Throttle Control System (ETCS) Control Relay OFF Malfunction
- DTC P1683: Throttle Valve Default Position Spring Performance Problem
- DTC P1684: Throttle Valve Return Spring Performance Problem
- DTC P16BB: Alternator B Terminal Circuit Low Voltage
- DTC P16BC: Alternator FR Terminal Circuit/IGP Low Voltage
- DTC P16C4: Engine Mount Actuator Control Power Circuit Stuck OFF (Engine Type: J35Z1)
- DTC P16C5: Engine Mount Actuator Control Power Circuit Stuck ON (Engine Type: J35Z1)
- DTC P16C6: Engine Mount Actuator High Voltage During Function Test (Engine Type: J35Z1)
- DTC P16C7: Rear Engine Mount Actuator Control Circuit High Current (Engine Type: J35Z1)
- DTC P16C8: Front Engine Mount Actuator Control Circuit High Current (Engine Type: J35Z1)
- DTC P16C9: Engine Mount Control Unit Internal Circuit Malfunction (Engine Type: J35Z1)
- DTC P2101: Electronic Throttle Control System (ETCS) Malfunction
- DTC P2118: Throttle Actuator Current Range/Performance Problem
- DTC P2122: Accelerator Pedal Position (APP) Sensor A (Throttle Position Sensor D) Circuit Low Voltage
- DTC P2123: Accelerator Pedal Position (APP) Sensor A (Throttle Position Sensor D) Circuit High Voltage
- DTC P2127: Accelerator Pedal Position (APP) Sensor B (Throttle Position Sensor E) Circuit Low Voltage
- DTC P2128: Accelerator Pedal Position (APP) Sensor B (Throttle Position Sensor E) Circuit High Voltage
- DTC P2135: Throttle Position (TP) Sensor A/B Voltage Incorrect Correlation
- DTC P2138: Accelerator Pedal Position (APP) Sensor A/B (Throttle Position Sensor D/E) Incorrect Voltage Correlation
- DTC P2176: Throttle Actuator Control System Idle Position Not Learned
- DTC P2183: Engine Coolant Temperature (ECT) Sensor 2 Circuit Range/Performance Problem
- DTC P2184: Engine Coolant Temperature (ECT) Sensor 2 Circuit Low Voltage
- DTC P2185: Engine Coolant Temperature (ECT) Sensor 2 Circuit High Voltage
- DTC P2195: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) Signal Stuck Lean
- DTC P2197: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) Signal Stuck Lean
- DTC P2227: Barometric Pressure (BARO) Sensor Range/Performance Problem
- DTC P2228: Barometric Pressure (BARO) Sensor Circuit Low Voltage
- DTC P2229: Barometric Pressure (BARO) Sensor Circuit High Voltage
- DTC P2237: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) IP Circuit High Voltage
- DTC P2238: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) IP Circuit Low Voltage
- DTC P2240: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) IP Circuit High Voltage
- DTC P2241: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) IP Circuit Low Voltage
- DTC P2243: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) VCENT Circuit High Voltage
- DTC P2245: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) VCENT Circuit Low Voltage
- DTC P2247: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) VCENT Circuit High Voltage
- DTC P2249: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) VCENT Circuit Low Voltage
- DTC P2251: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) VS Circuit High Voltage
- DTC P2252: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) VS Circuit Low Voltage
- DTC P2254: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) VS Circuit High Voltage
- DTC P2255: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) VS Circuit Low Voltage
- DTC P2270: Rear Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 1, Sensor 2)) Circuit Signal Stuck Lean
- DTC P2271: Rear Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 1, Sensor 2)) Circuit Signal Stuck Rich
- DTC P2272: Front Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 2, Sensor 2)) Circuit Signal Stuck Lean
- DTC P2273: Front Secondary Heated Oxygen Sensor (Secondary HO2S (Bank 2, Sensor 2)) Circuit Signal Stuck Rich
- DTC P2279: Intake Air System Leak
- DTC P2413: Exhaust Gas Recirculation (EGR) System Malfunction
- DTC P2422: Evaporative Emission (EVAP) Canister Vent Shut Valve Closed Malfunction
- DTC P2610: Powertrain Control Module (PCM) Internal Power Off Timer Malfunction
- DTC P2627: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) LABEL Circuit Low Voltage
- DTC P2628: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) LABEL Circuit High Voltage
- DTC P2630: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) LABEL Circuit Low Voltage
- DTC P2631: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) LABEL Circuit High Voltage
- DTC P2646: VTEC System Stuck OFF (Engine Type: J35Z1)
- DTC P2646: Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Circuit Low Voltage (Engine Type: J35A9)
- DTC P2647: VTEC System Stuck ON (Engine Type: J35Z1)
- DTC P2647: Rocker Arm Oil Pressure Switch (VTEC Oil Pressure Switch) Circuit High Voltage (Engine Type: J35A9)
- DTC P2648: Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Circuit Low Voltage (Engine Type: J35A9)
- DTC P2648: Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Circuit Low Voltage (Engine Type: J35Z1)
- DTC P2649: Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Circuit High Voltage (Engine Type: J35A9)
- DTC P2649: Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Circuit High Voltage (Engine Type: J35Z1)
- DTC P2769: Short in Torque Converter Clutch Solenoid Valve Circuit
- DTC P2770: Open in Torque Converter Clutch Solenoid Valve Circuit
- DTC P2A00: Rear Air/Fuel Ratio (A/F) Sensor (Bank 1, Sensor 1) Range/Performance Problem
- DTC P2A03: Front Air/Fuel Ratio (A/F) Sensor (Bank 2, Sensor 1) Range/Performance Problem
- DTC U0073: F-CAN Malfunction (BUS-OFF)
- DTC U0114: F-CAN Malfunction (VTM-4 Control Unit-PCM) (Engine Type: J35A9)
- DTC U0122: F-CAN Malfunction (VSA Modulator-Control Unit-PCM)
- DTC U0155: F-CAN Malfunction (Gauge Control Module-PCM)
- DTC U1101: F-CAN Malfunction (ACM-PCM) (Engine Type: J35Z1)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.