Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 93 (SEATS)THIRD ROW SEAT ACCESS CABLE REPLACEMENT
2002 Honda Civic Si
Third Row Seat Access Cable Replacement
2002 Honda Civic SiSECTION Third Row Seat Access Cable Replacement
WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Take care not to bend the cable.
- Slide the right second row seat forward fully.
- Remove the pivot bolt cover, and using a T30 Torx bit, remove the pivot bolt from both sides, '03 model (see '03 MODEL ), '04-06 models (see '04-06 MODELS ).
- Remove the right second row seat-back cover/pad from the seat-back frame (see SECOND ROW SEAT COVER REPLACEMENT ).
- Lift the right second row seat cushion up, and remove the outer bracket cover, '03 model (see '03 MODEL ), '04-06 models (see '04-06 MODELS ).
- Disconnect the third row seat access cable (A) at both ends, then remove the cable.
- Install the third row seat access cable in the reverse order of removal, and make sure the cable is connected securely.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.