Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 93 (SEATS)LEFT SECOND ROW SEAT DISASSEMBLY/REASSEMBLY
2002 Honda Civic Si
Left Second Row Seat Disassembly/Reassembly
2002 Honda Civic SiSECTION Left Second Row Seat Disassembly/Reassembly
WARNING: This page is about a different car, the 2006 Acura MDX, 2005 Acura MDX, 2004 Acura MDX, and 2003 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required
KTC trim tool set SOJATP2014
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to kink the seat-back recline cables.
- Replace any damaged clips as new ones.
- Make sure the seat-back recline cables are connected securely. If necessary, adjust the cable tension (see step 10 in SECOND ROW SEAT-BACK RECLINE LEVER REPLACEMENT ).
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.