SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 48 (INTERIOR LIGHTS)INTERIOR LIGHTSFRONT INDIVIDUAL MAP LIGHT TEST
2002 Honda Civic Si

Front Individual Map Light Test

2002 Honda Civic SiSECTION Front Individual Map Light Test
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Carefully pry off the lens (A) with a small screwdriver.
    Fig 1: Carefully Prying Off Lens With Small Screwdriver
    G01558007Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the four mounting screws (B).
  3. Disconnect the 3P connector (C) from the housing (D).
  4. Check for continuity between the terminals in each switch position according to the table.
    Fig 2: Checking Continuity Between Terminals Table
    G01558008Courtesy of AMERICAN HONDA MOTOR CO., INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.