SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 198 (TIRE PRESSURE MONITOR SYSTEMS)TORQUE SPECIFICATIONS
2002 Honda Civic Si

Torque Specifications

2002 Honda Civic SiSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2008 Acura TSX, 2008 Acura TL, 2007 Acura TSX, 2007 Acura TL, and 2006 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Component Ft. Lbs. (N.m)
Wheel Nut
MDX 94 (127)
RDX, TL & TSX 80 (108)
INCH Lbs. (N.m) 
Tire Pressure Sensor Nut (1) 35 (4)
(1) Do not reuse any nuts that have been tightened (even one time) to the specified torque, as they are deformed inside. Do not use air or electric impact tools to tighten a valve stem nut. Tightening the nut beyond the specified torque can damage the nut. You may hear a snap or pop as you tighten the nut (this is normal). Make sure that there is no space between the sensor and the wheel.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.