Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 188 (POWER TAILGATE)POWER TAILGATE OUTSIDE BEEPER TEST/REPLACEMENT
2002 Honda Civic Si
Power Tailgate Outside Beeper Test/Replacement
2002 Honda Civic SiSECTION Power Tailgate Outside Beeper Test/Replacement
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear bumper (see REAR BUMPER REMOVAL/INSTALLATION ).
- Disconnect the 2P connector (A) from the power tailgate beeper (B), then remove the beeper.
- Test the beeper by connecting battery power to the No. 1 terminal and ground to the No. 2 terminal. The beeper should click.
- If the beeper does not click, replace it.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.