Remote Control Assembly

This assembly operates cables that release the front and rear slide door latches, pulls the inner handle lower roller latch release cable, triggers the 3 remote control switches, and activates the failsafe lever cable. The assembly includes the remote control switches, the door lock actuator, the door lock, the child-proof lock, and the inside door handle linkage.

• Remote Control Switch 1 (A)-This switch signals the power sliding door control unit that the outside door handle is being pulled or the inside door handle is being pulled toward the open direction while the child safety lock is OFF.
• Remote Control Switch 2 (B)-This switch signals the power sliding door control unit that the inside door handle is being pulled toward the close position.
• Remote Control Switch 3 (C)-This switch signals the power sliding door control unit that the inside door handle is being pulled toward the open position while the child safety lock is ON. This switch is used for safety reasons because remote control switch 1 is not actuated when the child safety lock is ON and the inner handle is pulled toward the open position.

Fig 1: View Of Remote Control Assembly

Courtesy of AMERICAN HONDA MOTOR CO., INC.