Removal and Installation: Installation

2002 Honda Civic SiSECTION Installation
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the relays and connect the connectors to the under-hood fuse/relay box, then install the under-hood fuse/relay box in the reverse order of removal.
  2. Install the removed parts in the reverse order of removal.
  3. Connect the positive cable to the battery, then connect the negative cable to the battery.
  4. Do the idle learn procedure (see PCM IDLE LEARN PROCEDURE ).
  5. Enter the anti-theft codes for the radio and navigation system, then enter the customer's radio station and XM channel presets.
  6. Reset the clock.
  7. Do the power window control unit reset procedure (see RESETTING THE POWER WINDOW CONTROL UNIT ).
  8. Confirm that all systems work properly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.