Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 159 (SEATS)THIRD ROW SEAT PIVOT DISASSEMBLY/REASSEMBLYCENTER
2002 Honda Civic Si
Third Row Seat Pivot Disassembly/Reassembly: Center
2002 Honda Civic SiSECTION Center
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the seat center pivot (see THIRD ROW SEAT PIVOT REMOVAL/INSTALLATION ).
- Remove the screws, then remove the center pivot cover brackets (A, B).
- Remove the bolt, and separate both pivot bases (A, B), then remove the spring pin (C). Remove the pivot bolt (D), pivot bracket (E), and bushings (F, G) from the pivot base.
- Reassemble the pivot in the reverse order of disassembly, and replace the spring pins and bushings with new ones.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.