Third Row Seat Latch Cable Replacement

2002 Honda Civic SiSECTION Third Row Seat Latch Cable Replacement
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools Required 

KTC trim tool set SOJATP2014

NOTE:
  • Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
  • Take care not to kink the cables.
  • Put on gloves to protect your hands.
  1. Remove the third row seat (see THIRD ROW SEAT REMOVAL/INSTALLATION  ).
  2. Remove these items from the seat frame:
  3. Reassemble the left seat-back frame and left seat cushion frame (see step 11 in THIRD ROW SEAT DISASSEMBLY/REASSEMBLY  )
  4. From the back of the seat foot (A), detach the clips, then remove the rear cover (B).
    Fig 1: Removing Rear Cover (Left Third Row Seat)
    G03706157Courtesy of AMERICAN HONDA MOTOR CO., INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.