Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 155 (DOORS)SLIDING DOOR FRONT LATCH REPLACEMENT
2002 Honda Civic Si
Sliding Door Front Latch Replacement
2002 Honda Civic SiSECTION Sliding Door Front Latch Replacement
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Put on gloves to protect your hands.
- Remove the outer handle crank (see SLIDING DOOR OUTER HANDLE CRANK REPLACEMENT ).
- Release the cable holder (A). Disconnect the front latch cable (B), and detach the cable clips (C).
- Remove the screws, then remove the front latch (D).
- Do the sliding door cable adjustment on the front cable (see FRONT LATCH CABLE ).
- Install the front latch in the reverse order of removal, and note these items:
- Make sure the cables are connected securely.
- Take care not to bend any of the cables.
- Make sure the door locks and opens properly.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.