Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 143 (INTAKE AIR SYSTEM)RESONATOR REMOVAL/INSTALLATION

2002 Honda Civic Si

Resonator Removal/Installation

2002 Honda Civic SiSECTION Resonator Removal/Installation

WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front bumper (see FRONT BUMPER REMOVAL/INSTALLATION ).
Remove the bolt (A), clips (B), and cover (C).

Fig 1: Removing Bolt, Clips And Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the intake air duct (D).
Remove the bolts (A), and resonator (B).

Fig 2: Removing Resonator
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the parts in the reverse order of removal.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.