SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 136 (PGM-FI SYSTEM)CMP SENSOR REPLACEMENT
2002 Honda Civic Si

CMP Sensor Replacement

2002 Honda Civic SiSECTION CMP Sensor Replacement
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the timing belt, J35A6 engine (see TIMING BELT REMOVAL ), J35A7 engine (see TIMING BELT REMOVAL ).
  2. Remove the front camshaft pulley (CMP sensor pulse plate) (A).
    Fig 1: Removing Front Camshaft Pulley (CMP Sensor Pulse Plate)
    G03704385Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the CMP sensor connector (B), then remove the back cover (C).
  4. Remove the CMP sensor (A) from the back cover.
    Fig 2: Identifying Loosening Torque Of CMP Sensor Bolt
    G03704386Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the sensor in the reverse order of removal. Install the timing belt, J35A6 engine (see TIMING BELT INSTALLATION ), J35A7 engine (see TIMING BELT INSTALLATION ).
  6. Do the CKP pattern clear/CKP pattern learn procedure (see CKP PATTERN CLEAR/CKP PATTERN LEARN ).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.