SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2002CIVIC SIREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 128 (VSA (VEHICLE STABILITY ASSIST) SYSTEM COMPONENTS)SYSTEM DESCRIPTIONTCS CONTROLPRESSURE RETAINING MODE
2002 Honda Civic Si

Pressure Retaining Mode

2002 Honda Civic SiSECTION Pressure Retaining Mode
WARNING: This page is about a different car, the 2006 Honda Odyssey and 2005 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.

VSA NO valve closed, VSA NC valve closed, inlet valve open, outlet valve closed, pump motor ON.

Front caliper fluid is retained by the VSA NO valve and VSA NC valve.

Fig 1: TCS Control Of Pressure Retaining Mode
G03705630Courtesy of AMERICAN HONDA MOTOR CO., INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.