Design Specifications

2000 Honda Accord LX Coupe V6-3.0LSECTION Design Specifications
Steering Type Power-assisted rack and pinion
Overall ratio 15.77
Turns, lock-to-lock 3.05
Steering wheel diameter 380 mm
Suspension Type Front Independent double wishbone, coil spring with stabilizer
Rear Five-link double wishbone
Shock absorber Front and rear Telescopic, hydraulic, nitrogen gas-filled
Wheel alignment Camber Front 0 deg
Rear -0 deg 30'
Caster Front 2 deg 48'
Total toe Front 0 mm
Rear IN 2 mm
Tires Size of front and rear tires P205/65 R15 92V
Size of spare tire T135/90D15 100M
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.