Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA2000ACCORD LX COUPE V6-3.0LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSDESCRIPTION AND OPERATIONINTAKE AIR SYSTEM
2000 Honda Accord LX Coupe V6-3.0L
Intake Air System
2000 Honda Accord LX Coupe V6-3.0LSECTION Intake Air System
Intake Air System Diagram
This system supplies air to the engine. A resonator in the intake air duct provides additional silencing as air is drawn into the system.
Intake Air Bypass Control System (Fuel Air (FIA) Control System)
When the engine is running, the Intake Air Bypass control valve sends air to the fuel injectors.
Throttle Body
The throttle body is a single-barrel side draft type. The lower portion of the throttle valve is heated by engine coolant from the cylinder head. The idle adjusting screw, which increases/decreases bypass air, is located on the top of the throttle body.
This system supplies air to the engine. A resonator in the intake air duct provides additional silencing as air is drawn into the system.
Intake Air Bypass Control System (Fuel Air (FIA) Control System)
When the engine is running, the Intake Air Bypass control valve sends air to the fuel injectors.
Throttle Body
The throttle body is a single-barrel side draft type. The lower portion of the throttle valve is heated by engine coolant from the cylinder head. The idle adjusting screw, which increases/decreases bypass air, is located on the top of the throttle body.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.