Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1995PRELUDE L4-2.3L DOHCREPAIR AND DIAGNOSISRELAYS AND MODULESRELAYS AND MODULES - BRAKES AND TRACTION CONTROLELECTRONIC BRAKE CONTROL MODULEDESCRIPTION AND OPERATION
1995 Honda Prelude L4-2.3L DOHC
Electronic Brake Control Module: Description and Operation
1995 Honda Prelude L4-2.3L DOHCSECTION Description and Operation
The main function section of the control unit performs calculations on the basis of the signals from each speed sensor. It controls the operation of the anti-lock brake system by putting the solenoid valves in the modulator unit into action for each front brake and for the two rear brakes. The sub-function section gives driving signals to the pump motor and also gives self-diagnosis signals.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.