Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1995DEL SOL L4-1.5L SOHCREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER HEAD ASSEMBLYVALVE GUIDE
1995 Honda Del Sol L4-1.5L SOHC
Valve Guide
1995 Honda Del Sol L4-1.5L SOHCSECTION Valve Guide
Cylinder Head Warpage Limit 0.002 inches
Cylinder Head Minimum Thickness 3.738 inches
Valve Guides:
Standard Inside Diameter 0.217-0.218 inches
Stem To Guide Clearance:
Intake 0.001-0.002 inches
Exhaust 0.002-0.003 inches
Valve Seats:
Seat Angle, Degrees 45
Seat Width:
Intake 0.033-0.045
Exhaust 0.049-0.061 inches
Cylinder Head Minimum Thickness 3.738 inches
Valve Guides:
Standard Inside Diameter 0.217-0.218 inches
Stem To Guide Clearance:
Intake 0.001-0.002 inches
Exhaust 0.002-0.003 inches
Valve Seats:
Seat Angle, Degrees 45
Seat Width:
Intake 0.033-0.045
Exhaust 0.049-0.061 inches
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.