Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHONDA1991ACCORD DX, 2D COUPE, STANDARDREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROLS - SPECIFICATIONSCAPACITIESFLUID CAPACITIES
1991 Honda Accord DX, 2D Coupe, Standard
Fluid Capacities
1991 Honda Accord DX, 2D Coupe, StandardSECTION Fluid Capacities
FLUID CAPACITIES
| Application | Quantity | ||
|---|---|---|---|
| Crankcase (Includes Filter) | |||
| Accord | 4.0 Qts. (3.8L) | ||
| Civic & CRX | 3.7 Qts. (3.5L) | ||
| Prelude | 4.0 Qts. (3.8L) | ||
| Cooling System (Includes Heater) | |||
| Accord | |||
| Automatic Transaxle | 7.5 Qts. (7.1L) | ||
| Manual Transaxle | 7.0 Qts. (6.6L) | ||
| Civic & CRX | 5.8 Qts. (5.5L) | ||
| Prelude | 8.2 Qts. (7.8L) | ||
| Automatic Transaxle (Dexron-II) | |||
| Accord | |||
| Oil Change | 2.5 Qts. (2.4L) | ||
| Overhaul | 6.4 Qts. (6.0L) | ||
| Civic & CRX | |||
| Oil Change | 2.5 Qts. (2.4L) | ||
| Overhaul | 5.7 Qts. (5.4L) | ||
| Prelude | |||
| Oil Change | 3.0 Qts. (2.8L) | ||
| Overhaul | 6.6 Qts. (6.2L) | ||
| Manual Transaxle (SAE 30W, 10W-40, 20W-40) | |||
| Accord | |||
| Oil Change | 2.0 Qts. (1.9L) | ||
| Overhaul | 2.1 Qts. (2.0L) | ||
| Civic & CRX | |||
| Oil Change | 1.9 Qts. (1.8L) | ||
| Overhaul | 2.0 Qts. (1.9L) | ||
| Prelude | |||
| Oil Change | 2.3 Qts. (2.2L) | ||
| Overhaul | 2.2 Qts. (2.1L) | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.