Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSGMC2013SAVANA 3500 V8-6.6L DSL TURBOREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL MODULE HVACSERVICE AND REPAIR
2013 GMC Savana 3500 V8-6.6L DSL Turbo
Control Module HVAC: Service and Repair
2013 GMC Savana 3500 V8-6.6L DSL TurboSECTION Service and Repair
Auxiliary HVAC Control Processor Replacement
Removal Procedure
1. Lower the front headliner to access the HVAC control processor. Refer to Headlining Front Trim Panel Replacement Headlining Front Trim Panel Replacement.
2. Remove the HVAC control processor from the roof panel.
3. Remove the HVAC control processor access cover (3).
4. Remove the HVAC control processor (2) from the HVAC processor case (1).
Installation Procedure
1. Install the HVAC control processor (2) to the HVAC processor case (1).
2. Install the HVAC control processor access cover (3).
3. Install the HVAC control processor to the roof panel.
4. Install the front headliner. Refer to Headlining Front Trim Panel Replacement Headlining Front Trim Panel Replacement.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.