Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2025TRANSIT-150 BASE, 3.5L ENG VIN G, RWDREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2025 Ford Transit-150 Base, 3.5L Eng VIN G, RWD
Quick Lookups: Fluids
2025 Ford Transit-150 Base, 3.5L Eng VIN G, RWDSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | Normally Aspirated,w/o Rear Heating Ventilation and A/C | 3.70 OZS. | 0.1 L | PAG Refrigerant Compressor Oil/YN-12-D | S | ||
| Air Cond Compressor Oil | Normally Aspirated,w/Rear Heating Ventilation and A/C | 7.40 OZS. | 0.21 L | PAG Refrigerant Compressor Oil/YN-12-D | S | ||
| Air Cond Compressor Oil | Turbocharger,w/o Rear Heating Ventilation and A/C | 3.70 OZS. | 0.1 L | PAG Refrigerant Compressor Oil/YN-12-D | S | ||
| Air Cond Compressor Oil | Turbocharger,w/Rear Heating Ventilation and A/C | 7.40 OZS. | 0.21 L | PAG Refrigerant Compressor Oil/YN-12-D | S | ||
| Air Cond Refrigerant | Normally Aspirated,w/o Rear Heating Ventilation and A/C | 1.76 LBS. | 0.79 KG | R-134a | S | ||
| Air Cond Refrigerant | Normally Aspirated,w/Rear Heating Ventilation and A/C | 2.45 LBS. | 1.11 KG | R-134a | S | ||
| Air Cond Refrigerant | Turbocharger,w/o Rear Heating Ventilation and A/C | 1.87 LBS. | 0.84 KG | R-134a | S | ||
| Air Cond Refrigerant | Turbocharger,w/Rear Heating Ventilation and A/C | 3.15 LBS. | 1.42 KG | R-134a | S | ||
| Automatic Transmission Fluid | 13.00 QTS. | 12.3 L | MOTORCRAFT Automatic Transmission Fluid MERCON ULV | S | |||
| Brake Fluid | N/A | N/A | MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. | S | |||
| Differential Gear Oil | Front Axle | 0.80 QTS. | 0.75 L | SAE 75W-140 Synthetic Rear Axle Lubricant | S | ||
| Differential Gear Oil | Rear Axle,Limited Slip Differential | 5.75 PTS. | 2.72 L | SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant | Add Rear Axle Friction Modifier 0.1 qt. | S | |
| Differential Gear Oil | Rear Axle,Non-Limited Slip | 6.00 PTS. | 2.83 L | SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant | S | ||
| Engine Coolant | w/Aux Heater | 13.50 QTS. | 12.77 L | MOTORCRAFT Yellow Antifreeze/Coolant Prediluted | Add the coolant type originally equipped in the vehicle. | S | |
| Engine Coolant | w/o Aux Heater | 12.40 QTS. | 11.73 L | MOTORCRAFT Yellow Antifreeze/Coolant Prediluted | Add the coolant type originally equipped in the vehicle. | S | |
| Engine Oil | Normally Aspirated,w/Filter | 12.00 QTS. | 11.35 L | MOTORCRAFT SAE 5W-30 Synthetic Blend Motor Oil | To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil. | S | |
| Engine Oil | Turbocharger,w/Filter | 6.00 QTS. | 5.67 L | MOTORCRAFT SAE 5W-30 Synthetic Blend Motor Oil | To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil. | S | |
| Fuel Tank | Larger Tank | 30.50 GALS. | 115.45 L | S | |||
| Fuel Tank | Standard Tank | 25.10 GALS. | 95.01 L | S | |||
| Transfer Case Fluid | 1.47 QTS. | 1.39 L | MOTORCRAFT Automatic Transmission Fluid MERCON LV | S | |||
| Windshield Washer Fluid | 4.80 QTS. | 4.54 L | MOTORCRAFT Premium Windshield Washer Concentrate Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.