SYS.OK|MANUAL.DB● LIVE
2025 Ford Expedition Platinum, 3.5L Eng VIN G

Quick Lookups: Fluids

2025 Ford Expedition Platinum, 3.5L Eng VIN GSECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 6.10 OZS. 0.18 L PAG Oil YN-35 Approximate capacity. S
Air Cond Refrigerant 2.35 LBS. 1.06 KG R-1234yf Approximate capacity. S
Automatic Transmission Fluid 13.00 QTS. 12.3 L MOTORCRAFT Automatic Transmission Fluid MERCON ULV Approximate capacity. S
Brake Fluid N/A N/A MOTORCRAFT DOT 4 Low Viscosity (LV) High Performance Brake Fluid, or equivalent. S
Differential Gear Oil 4WD Front 1.80 QTS. 1.7 L MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant Approximate capacity. S
Differential Gear Oil Rear,8.8" axle 2.00 QTS. 1.89 L MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant Approximate capacity. S
Differential Gear Oil Rear,9.75" axle,w/Limited Slip Differential 2.40 QTS. 2.27 L MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant For complete refill of limited slip Ford axles, add 4.0 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A. S
Differential Gear Oil Rear,9.75" axle,w/o Limited Slip Differential 2.50 QTS. 2.36 L MOTORCRAFT SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant Approximate capacity. S
Engine Coolant 15.90 QTS. 15.04 L MOTORCRAFT Yellow Antifreeze/Coolant Prediluted Add the coolant type originally equipped in the vehicle. S
Engine Oil w/Filter 6.00 QTS. 5.67 L MOTORCRAFT SAE 5W-30 Premium Synthetic Blend Motor Oil or MOTORCRAFT SAE 5W-30 Full Synthetic Motor Oil SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F). S
Fuel Tank 123 IN. WB 23.60 GALS. 89.33 L S
Transfer Case Fluid 1.45 QTS. 1.37 L MOTORCRAFT Automatic Transmission Fluid MERCON LV Approximate capacity. S
Windshield Washer Fluid N/A N/A MOTORCRAFT Premium Windshield Washer Concentrate Fluid Follow the Manufacturer's Instructions for the mixture ratio. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.