Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012MUSTANG V8-5.4L SCREPAIR AND DIAGNOSISMAINTENANCEFLUIDSFLUID - DIFFERENTIALSPECIFICATIONSCAPACITY SPECIFICATIONS
2012 Ford Mustang V8-5.4L SC
Capacity Specifications
2012 Ford Mustang V8-5.4L SCSECTION Capacity Specifications
Rear axle 4.25 pints (2.0L)
Rear axle fluid friction modifier 4 oz. (118 ml)
Note: Rear axle lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water.
Note: Fill 1/4-9/16 in. (6-14 mm) below bottom of fill hold.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.