Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012FUSION FWD L4-2.5LREPAIR AND DIAGNOSISMAINTENANCEFLUIDSFLUID - A/TSPECIFICATIONSCAPACITY SPECIFICATIONS
2012 Ford Fusion FWD L4-2.5L
Capacity Specifications
2012 Ford Fusion FWD L4-2.5LSECTION Capacity Specifications
AUTOMATIC TRANSAXLE
6-Speed (6F35) 9.0 quarts (8.5 liters)
6-Speed (Aisin F21) 7.4 quarts (7.0 liters)
NOTE: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipsticks normal operating range.
6-Speed (6F35) 9.0 quarts (8.5 liters)
6-Speed (Aisin F21) 7.4 quarts (7.0 liters)
NOTE: Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipsticks normal operating range.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.