Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012FUSION FWD L4-2.5LREPAIR AND DIAGNOSISLIGHTING AND HORNSCOURTESY LAMPSERVICE AND REPAIR
2012 Ford Fusion FWD L4-2.5L
Courtesy Lamp: Service and Repair
2012 Ford Fusion FWD L4-2.5LSECTION Service and Repair
Puddle Lamp
Removal and Installation
1. Remove the exterior mirror glass.
2. Release the tab to remove the puddle lamp from the mirror housing.
3. NOTE: The LH puddle lamp bulb socket is rotated clockwise to remove and the RH puddle lamp bulb socket is rotated counterclockwise to remove.
Rotate the puddle lamp bulb socket approximately one-quarter turn and remove it from the puddle lamp.
4. NOTE: When rotating the bulb socket in the puddle lamp, the socket should come to a stop indicating it is completely installed.
NOTE: An audible click can be heard when the puddle lamp is fully seated.
To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.