Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012FUSION AWD V6-3.0L FLEX FUELREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCABIN TEMPERATURE SENSOR / SWITCHSERVICE AND REPAIRIN-VEHICLE TEMPERATURE SENSOR
2012 Ford Fusion AWD V6-3.0L Flex Fuel
In-Vehicle Temperature Sensor
2012 Ford Fusion AWD V6-3.0L Flex FuelSECTION In-Vehicle Temperature Sensor
In-Vehicle Temperature Sensor - Fusion, Milan
Fusion, Milan
Removal and Installation
1. Remove the instrument cluster finish panel.
2. Disconnect the in-vehicle temperature sensor aspirator hose connection at the heater core and evaporator core housing.
3. Detach the in-vehicle temperature sensor aspirator hose pin-type retainer.
4. Disconnect the in-vehicle temperature sensor electrical connector.
5. Remove the in-vehicle temperature sensor and aspirator hose assembly.
6. To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.