Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012FOCUS L4-2.0LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTRELAYS AND MODULES - POWERTRAIN MANAGEMENTRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSTECHNICAL SERVICE BULLETINSCUSTOMER INTERESTKEYLESS ENTRY - INTERMITTENT OPERATION
2012 Ford Focus L4-2.0L
Keyless Entry - Intermittent Operation
2012 Ford Focus L4-2.0LSECTION Keyless Entry - Intermittent Operation
TSB 11-10-1
10/03/11
INTERMITTENT REMOTE KEYLESS ENTRY (RKE)
OPERATION - KEY FOB - BUILT ON OR BEFORE
8/3/2011
FORD:
2012 Focus
The article supersedes TSB 11-8-16 to add a production fix date.
ISSUE
Some 2012 Focus vehicles built on or before 8/3/2011 may exhibit a condition where the key fob buttons do not unlock the doors.
ACTION
Reprogram the body control module to the latest software calibration level using the IDS release 74.03 or higher. This new calibration is not included in the VCM 2011.7 DVD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
111001A 2012 Focus: Reprogram 0.3 Hr.
The Body Control Module
(Do Not Use With Any
Other Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14A068 04
Disclaimer
10/03/11
INTERMITTENT REMOTE KEYLESS ENTRY (RKE)
OPERATION - KEY FOB - BUILT ON OR BEFORE
8/3/2011
FORD:
2012 Focus
The article supersedes TSB 11-8-16 to add a production fix date.
ISSUE
Some 2012 Focus vehicles built on or before 8/3/2011 may exhibit a condition where the key fob buttons do not unlock the doors.
ACTION
Reprogram the body control module to the latest software calibration level using the IDS release 74.03 or higher. This new calibration is not included in the VCM 2011.7 DVD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
111001A 2012 Focus: Reprogram 0.3 Hr.
The Body Control Module
(Do Not Use With Any
Other Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
14A068 04
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.