Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012FOCUS L4-2.0LREPAIR AND DIAGNOSISBODY AND FRAMEINTERIOR MOULDING / TRIMCONSOLESERVICE AND REPAIRCONSOLE - OVERHEAD
2012 Ford Focus L4-2.0L
Console - Overhead
2012 Ford Focus L4-2.0LSECTION Console - Overhead
Console - Overhead
WARNING: Before beginning any service procedure, REFER to Safety Warnings . Failure to follow this instruction may result in serious personal injury.
Exploded View
Removal
1. Open the sunglass bin and insert the interior trim removal tool in the openings to release the clips. Remove overhead console trim panel.
- Disconnect the electrical connectors.
2. Release the 2 rear and 2 side retainers and remove the overhead console.
3. Remove the 2 overhead console bracket screws, disconnect the electrical connector and detach the 2 electrical harness pushpins. Remove the overhead console bracket from the headliner.
Installation
1. To install, reverse the removal procedure.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.