Exterior Mirror

2012 Ford Fiesta L4-1.6LSECTION Exterior Mirror



Exterior Mirror

Removal and Installation

1. Remove the door speaker.

2. Disconnect the electrical connector.





3. Remove the exterior mirror nut cover.

4. NOTE: When installing the mirror, make sure to align the locating pin to the locating hole.
Remove the exterior mirror nut.

- To install, tighten to 14 Nm (124 lb-in).






5. Remove the exterior mirror.
- Route the electrical wiring harness through the door.


6. To install, reverse the removal procedure.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.