Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSFORD2012F 450 4WD SUPER DUTY V8-6.7L DSL TURBOPARTS AND LABORMAINTENANCELABOR TIMES

2012 Ford F 450 4WD Super Duty V8-6.7L DSL Turbo

Maintenance: Labor Times

2012 Ford F 450 4WD Super Duty V8-6.7L DSL TurboSECTION Labor Times

	Standard Hours	Manufacturer Warranty Hours	Skill Level	Notes
Service or Charge
Normal Service
7,500 Miles	1.8	0.0	C
15,000 Miles	1.8	0.0	C
22,500, Miles	1.8	0.0	C
Note:
To Change Fuel Filter, Add	1.1	0.0	B
30,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
37,500 Miles	1.8	0.0	C
45,000 Miles	1.8	0.0	C
Note:
To Change Fuel Filter, Add	1.1	0.0	B
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace the air inlet foam filter.
52,500 Miles	1.8	0.0	C
60,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note:
To Change Front Wheel Bearings and Seals, Add	2.0	0.0	B	Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used).
67,500 Miles	1.8	0.0	C
Note:
To Change Fuel Filter, Add	1.1	0.0	B
75,000 Miles	1.8	0.0	C
82,500 Miles	1.8	0.0	C
90,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note:
To Change Fuel Filter, Add	1.1	0.0	B
97,500 Miles	1.8	0.0	C
Note:
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace the air inlet foam filter.
100,000 Miles
Note:
To Change Engine Coolant, Add	0.7	0.0	C
To Change Rear Axle Fluid, Add	0.5	0.0	B	(DANA axles only)
105,000 Miles	1.8	0.0	C
112,500 Miles	1.8	0.0	C
Note:
To Change Fuel Filter, Add	1.1	0.0	B
120,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note:
To Change Front Wheel Bearings and Seals, Add	2.0	0.0	B	Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used).
127,500 Miles	1.8	0.0	C
135,000 Miles	1.8	0.0	C
Note:
To Change Fuel Filter, Add	1.1	0.0	B
142,500 Miles	1.8	0.0	C
150,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note:
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace the air inlet foam filter.
To Change Accessory Drive Belt(s), Add	0.4	0.0	C
To Change Front Axle Fluid, Add	0.5	0.0	B	(4WD vehicles)
To Change Transfer Case Fluid, Add	0.5	0.0	B
To Change Engine Coolant, Add	0.7	0.0	C
To Change Automatic Transmission Fluid, Add	1.5	0.0	B	Change automatic transmission fluid and filter on 6-speed TorqShift transmission.
To Change Rear Axle Fluid, Add	0.5	0.0	B	(DANA axles only)
To Change Front Wheel Bearings and Seals, Add	2.0	0.0	B	Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used).
Severe Service
2,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
5,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
7,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
10,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
12,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
15,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter, Add	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
17,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
20,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
22,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
To Change Fuel Filter, Add	1.1	0.0	B
25,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
27,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
30,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter Add,	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
To Change Wheel Bearing Grease and seals, Add	2.0	0.0	B	Replace wheel bearing grease and grease seals on 4X2 front wheel bearings (if non-sealed bearings are used) if using Special Operating conditions H, A, T, O, D.
32,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
35,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
37,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
40,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
42,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
45,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace the air inlet foam filter.
To Change Fuel Filter, Add	1.1	0.0	B
47,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
50,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Rear Axle Fluid, Add	0.5	0.0	B	Change rear axle lubricant (if equipped with a Dana rear axle; some F-350s, all F-450/550s) if using Special Operating conditions H, O.
To Change Transfer Case Fluid, Add	0.5	0.0	C	If using Special Operating Condition, O.
52,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
55,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
57,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
60,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note
To Change Engine Coolant , Add	0.7	0.0	C	If using Special Operating Condition I, L, H, T.
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter Add,	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
To Change Transfer Case Fluid, Add	0.5	0.0	B	if using Special Operating conditions L, H, A, T.
To Change Wheel Bearing Grease and seals, Add	2.0	0.0	B	Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used).
62,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
65,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
67,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
To Change Fuel Filter, Add	1.1	0.0	B
70,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
72,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
75,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter, Add	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
77,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
80,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
82,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
85,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
87,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
90,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter Add,	1.1	0.0	B
To Change Wheel Bearing Grease and seals, Add	2.0	0.0	B	Replace wheel bearing grease and grease seals on 4X2 front wheel bearings (if non-sealed bearings are used) if using Special Operating conditions H, A, T, O, D.
92,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
95,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
97,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note:
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace the air inlet foam filter.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
100,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Rear Axle Fluid, Add	0.5	0.0	C	(DANA axles only)
To Change Engine Coolant , Add	0.7	0.0	C
To Change Transfer Case Fluid, Add	0.5	0.0	C	If using Special Operating Condition, O.
102,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
105,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter, Add	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
107,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
110,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
112,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
To Change Fuel Filter Add,	1.1	0.0	B
115,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
117,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
120,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note
To Change Engine Coolant , Add	0.7	0.0	C	If using Special Operating Condition I, L, H, T.
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter Add,	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
To Change Transfer Case Fluid Add,	0.5	0.0	B	if using Special Operating conditions L, H, A, T.
To Change Wheel Bearing Grease and seals, Add	2.0	0.0	B	Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used).
122,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
125,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
127,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
130,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
132,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
135,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
To Change Fuel Filter, Add	1.1	0.0	B
137,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
140,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
142,500 Miles	0.8	0.0	C	If using Special Operating Conditions O, D.
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace if indicated by gauge if using Special Operating Condition O, D.
To Change Engine Oil and Filter, Add	0.5	0.0	C	Only if using Special Operating Condition U but not O, D.
145,000 Miles	1.8	0.0	C
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C
147,500 Miles
Note
To Change Engine Oil and Filter, Add	0.5	0.0	C	If using Special Operating Condition U.
150,000 Miles	1.8	0.0	C	OE does not provide a labor time for the climate-controlled seat filter (if equipped).
Note
To Change Air Inlet Foam Filter, Add	0.3	0.0	C	Replace the air inlet foam filter.
To Change Engine Coolant, Add	0.7	0.0	C
To Change Accessory Drive Belt(s), Add	0.4	0.0	C
To Change Fuel Filter Add,	1.1	0.0	B	Replace engine and frame-mounted fuel filters, if using Special Operating Conditions, I, L, H, A, T, O, D, B.
To Change Automatic Transmission Fluid 6 Speed TorqShift, Add	1.5	0.0	B	Change automatic transmission fluid and filter on 6-speed TorqShift transmission.
To Change Transfer Case Fluid Add,	0.5	0.0	C
To Change Front Axle Fluid, Add	0.5	0.0	B	Change front axle fluid (4WD vehicles).
To Change Rear Axle Fluid, Add	0.5	0.0	B	DANA Axles Only.
To Change Wheel Bearing Grease and seals, Add	2.0	0.0	B	Replace front wheel bearings and seals on 4X2 vehicles (if non-sealed bearings are used).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.