Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSFORD2012EXPLORER FWD V6-3.5LREPAIR AND DIAGNOSISWIPER AND WASHER SYSTEMSWIPER BLADESERVICE AND REPAIR
2012 Ford Explorer FWD V6-3.5L
Wiper Blade: Service and Repair
2012 Ford Explorer FWD V6-3.5LSECTION Service and Repair
Wiper Blade - Rear
Removal
NOTICE: Lifting the wiper arm beyond its maximum angle may result in damage to the wiper arm or the wiper arm heel.
NOTICE: Allowing the wiper arm to contact the glass may result in damage to the glass.
1. Remove the rear wiper blade.
1. Using one hand, hold the rear wiper blade against the rear liftgate glass.
2. Using the other hand, pull the rear wiper pivot arm away from the rear wiper blade.
Installation
1. Attach the new wiper blade on the wiper arm and press it into place until a snap is heard.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.